| CELLULAR |
|
| AL300-MG(Global) |
LTE FDD Cat. M1 |
| |
B1, B2, B3, B4, B5, B8, B12, B13, B18, B19,B20, B25, B26, B27, B28, B66, B85 |
| |
GSM 850, 900, 1800, 1900 |
| AL300-MX(N.America) |
LTE FDD Cat.M |
| |
B2, B4, B5, B12, B13 |
| AL300-LE (EMEA.APAC) |
LTE FDD Cat.1 |
| |
B1, B3, B5, B7, B8, B20, B28 |
| |
GSM 850, 900, 1800, 1900 |
| Data Support |
UDP / IP, TCP / IP, SMS over IMS, MQTT |
| Antenna |
Embedded cellular antenna |
| POSITIONING |
|
| Receiver Type |
33 Tracking channels |
| |
99 Acquisition channels |
| Location Technology |
GPS & GLONASS |
| SBAS Support |
WAAS, EGNOS, GAGAN, MSAS |
| Tracking Sensitivity |
-167dBm |
| Acquisition Sensitivity |
-149dBm |
| Location Accuracy |
2.5m CEP 50% |
| Antenna |
Internal |
| INPUTS/OUTPUTS |
|
| Variant I * (Digital Inputs) |
2 Digital Inputs |
| Variant II * (RS232) |
1 Serial Port |
| Variant III * (CAN BUS) |
1 Vehicle CAN H/L |
| |
Protocol: ISO 15765-4, SAE J1939 |
| Ignition Input |
1 Positive Input |
| Digital Output |
1 (Max. sink current 300mA) |
| LED Indicator |
2 LEDs (GPS, Cellular) |
| Bluetooth * |
Low Energy v5.1, Class 2 |
| 1-Wire® Interface |
1 (iButton®, Temperature sensors)** |
| SENSORS |
|
| Accelerometer |
3-axis, ±16g |
| ELECTRICAL |
|
| Operating Voltage |
Vehicle 12V / 24V system |
| Current Consumption |
Operating: 100mA@12V |
| |
Deep Sleep Mode : 2.4mA@12V |
| Backup Battery Type |
3.7V, Li-Ion, 650mAh |
| MEMORY |
|
| Internal Flash Memory |
16 Megabits |
| |
Up to 12,000 logs |
| |
Up to 10,000 queues |
| ENVIRONMENTAL |
|
| Operating Temperature |
−20°C to 60°C |
| Humidity |
95%RH @ 50° C non-condensing |
| Vibration/Shock |
MIL-STD-810G, SAE J1455 |
| IP Rating |
IP67 |
| PHYSICAL |
|
| Dimension |
88.9 mm x 76.5 mm x 21.2 mm (With screw bracket) |
| Weight |
150g |
| Enclosure |
Flame Retardant PC |
| Mounting Method |
Screw mounting bracket, Adhesive, Cable Tie |
| CONNECTORS |
|
| I/O Connection |
Molded power and I/O harness |
| SIM Card Socket |
NanoSIM (4FF) |
| CONFIGURATION |
|
| Device Maintenance |
Firmware and configuration |
| |
RS232 (Variant II) |
| |
UART Cable (Variant I & III only)** |
| |
Update via (ATrack Device Management) |
| |
RS232 (Variant II) |
| |
UART Cable (Variant I & III only)** |
| CERTIFICATIONS |
|
| Standards |
CE, FCC, IC, TELEC, PTCRB, RoHS |
| Carriers |
AT&T, Verizon |
| |
|
| |
|
| * Optional |
|
| ** Optional Accessories Required |
|
.png)
.png)
