AL300は、車両の監視に理想的な防水トラッカーです。フリート管理、建設、農業機械、オートバイに適用されます。CANbusにより車両との高度な統合を行なうことができます。また、Bluetoothによりモバイルアプリに接続することができます。
| CELLULAR | |
| AL300-MG(Global) | LTE FDD Cat. M1 |
| B1, B2, B3, B4, B5, B8, B12, B13, B18, B19,B20, B25, B26, B27, B28, B66, B85 | |
| GSM 850, 900, 1800, 1900 | |
| AL300-MX(N.America) | LTE FDD Cat.M |
| B2, B4, B5, B12, B13 | |
| AL300-LE (EMEA.APAC) | LTE FDD Cat.1 |
| B1, B3, B5, B7, B8, B20, B28 | |
| GSM 850, 900, 1800, 1900 | |
| Data Support | UDP / IP, TCP / IP, SMS over IMS, MQTT |
| Antenna | Embedded cellular antenna |
| POSITIONING | |
| Receiver Type | 33 Tracking channels |
| 99 Acquisition channels | |
| Location Technology | GPS & GLONASS |
| SBAS Support | WAAS, EGNOS, GAGAN, MSAS |
| Tracking Sensitivity | -167dBm |
| Acquisition Sensitivity | -149dBm |
| Location Accuracy | 2.5m CEP 50% |
| Antenna | Internal |
| INPUTS/OUTPUTS | |
| Variant I * (Digital Inputs) | 2 Digital Inputs |
| Variant II * (RS232) | 1 Serial Port |
| Variant III * (CAN BUS) | 1 Vehicle CAN H/L |
| Protocol: ISO 15765-4, SAE J1939 | |
| Ignition Input | 1 Positive Input |
| Digital Output | 1 (Max. sink current 300mA) |
| LED Indicator | 2 LEDs (GPS, Cellular) |
| Bluetooth * | Low Energy v5.1, Class 2 |
| 1-Wire® Interface | 1 (iButton®, Temperature sensors)** |
| SENSORS | |
| Accelerometer | 3-axis, ±16g |
| ELECTRICAL | |
| Operating Voltage | Vehicle 12V / 24V system |
| Current Consumption | Operating: 100mA@12V |
| Deep Sleep Mode : 2.4mA@12V | |
| Backup Battery Type | 3.7V, Li-Ion, 650mAh |
| MEMORY | |
| Internal Flash Memory | 16 Megabits |
| Up to 12,000 logs | |
| Up to 10,000 queues | |
| ENVIRONMENTAL | |
| Operating Temperature | −20°C to 60°C |
| Humidity | 95%RH @ 50° C non-condensing |
| Vibration/Shock | MIL-STD-810G, SAE J1455 |
| IP Rating | IP67 |
| PHYSICAL | |
| Dimension | 88.9 mm x 76.5 mm x 21.2 mm (With screw bracket) |
| Weight | 150g |
| Enclosure | Flame Retardant PC |
| Mounting Method | Screw mounting bracket, Adhesive, Cable Tie |
| CONNECTORS | |
| I/O Connection | Molded power and I/O harness |
| SIM Card Socket | NanoSIM (4FF) |
| CONFIGURATION | |
| Device Maintenance | Firmware and configuration |
| RS232 (Variant II) | |
| UART Cable (Variant I & III only)** | |
| Update via (ATrack Device Management) | |
| RS232 (Variant II) | |
| UART Cable (Variant I & III only)** | |
| CERTIFICATIONS | |
| Standards | CE, FCC, IC, TELEC, PTCRB, RoHS |
| Carriers | AT&T, Verizon |
| * Optional | |
| ** Optional Accessories Required |
.png)
.png)
